The feeling of purchasing a brand new Acer laptop is incredible. The main torture begins when it starts generating problems like unable to see the display even after turning it on.

To get out of this scenario, hunt down the steps below and until you found the appropriate solution, don’t back off. A support team would be there with you just a call away; you may also reach them until the problem gets resolved.

Acer Technical Support recommends the solutions for a functional laptop

1. Connect to the power cable: In case your laptop is just running over the battery power, attach the adapter for removing the dead battery as the cause of the issue. You may ensure that the cord is properly plugged in with both the ends and connected securely.
   
   
2. Detach it from the station of docking: In case your PC is connected to a docking station, detach it and try turning your device on for the verification of the cause.
   
   
3. Eliminate the entire external peripherals: For you to troubleshoot the problem detach any sort of external devices like a mouse or USB for inspecting the cause.
   
   
4. Remove and reconnect the cells: This system can be in a power state preventing it from the booting properly. Disconnect the cable and leave it for at least a minute. As the wait is over, put it back and try turning your laptop again.
   
   
5. Poor hardware: In case you have been through the entire sections above and your laptop continues to not switch on, a component is likely to be failed. Configure it well and replace it. 

Are you still handling any Acer related problem? Quickly pick up the telephone and dial Acer Technical Support Phone Number @ 1-844-888-3870 and get quick help against the issues. You can ask anything from our toll-free number and you will get a speedy fixation at an affordable price.

Original Source